Why Durability Class Matters in Intumescent Fire Coatings

Haberler

Why Durability Class Matters in Intumescent Fire Coatings

Fire rating alone does not decide the right intumescent coating. Durability class, exposure conditions and system compatibility matter just as much.

Intumescent fire coatings used to protect structural steel react chemically when exposed to high temperatures in a fire. They expand and form a protective layer that insulates the steel surface from heat.

This layer delays heat transfer to the steel and extends the time it takes for load-bearing members to reach their critical temperature. It helps the structure keep its load-bearing capacity for the specified fire resistance period.

However, when selecting a fire protection system it is not enough to look only at time ratings such as 30, 60, 90 or 120 minutes of fire resistance.

The environmental conditions the system will face during application and throughout its service life must also be assessed.

Durability matters as much as fire resistance

When an intumescent coating is selected for a project, the first criterion considered is usually the required fire resistance period. Different periods may be required depending on the use of the building, the structural system and the applicable regulations.

But the real performance of the system does not depend only on how it behaves during a fire.

Over the years, the coating system may be exposed to:

  • humidity,
  • water,
  • UV radiation,
  • temperature changes,
  • atmospheric pollutants,
  • corrosion,
  • outdoor weather conditions.

If these effects cause the coating system to deteriorate early, the performance expected in a fire can also be compromised.

For this reason, fire resistance period and environmental durability must be assessed together when choosing a system.

An intumescent coating is not a system on its own

In most applications, fire protection of structural steel should be treated as an integrated coating system made up of several layers.

A typical system is built up as follows:

Steel surface → Primer → Intumescent coating → Protective topcoat

In controlled interior environments with low corrosivity, primer and intumescent coating may be sufficient for some systems. In harsher conditions, a suitable topcoat may be required.

What matters is not only the number of layers. The primer, intumescent coating and topcoat must be compatible with each other and verified as a system.

Site conditions must be taken into account

The fact that a building will finally be enclosed and climate-controlled does not mean the coating system can be selected for those conditions alone.

After application, steel members may be temporarily exposed to outdoor conditions during transport, storage and erection.

For example, steelwork destined for a dry interior may face rain, high humidity, sunlight or temperature swings during the construction phase.

Two separate periods should therefore be considered when specifying the system:

the application and construction period, and the final service period of the building.

Where necessary, a suitable topcoat becomes part of the system to protect the intumescent coating from these temporary or permanent environmental effects.

How do humidity and water affect intumescent coatings?

Because they are reactive, intumescent coatings can be affected by environmental conditions. Prolonged exposure to humidity or water beyond the design limits of the system can affect the physical properties of the coating and the protective char it must form in a fire.

In suitable projects, the topcoat therefore acts as a protective barrier that limits direct contact between the intumescent coating and the environment.

However, it is not enough for the topcoat to be weather-resistant.

It must not prevent the intumescent coating from expanding in a fire, and its compatibility with the fire protection system must be verified.

Corrosion protection and fire protection belong together

Corrosion of the steel surface beneath the fire protection system can also affect the integrity of the system.

As corrosion progresses, adhesion between the steel surface, the primer and the fire protective coating can be impaired. Surface preparation and correct primer selection are therefore important parts of the long-term performance of the fire protection system.

The environmental corrosivity categories in ISO 12944 are an important reference when assessing corrosive environments for steel structures.

But when assessing the environmental durability of intumescent coatings, looking at the corrosivity category alone is not enough.

EAD 350402-00-1106 durability classes

The service environments of reactive fire protective coatings can be assessed using the exposure classes defined in EAD 350402-00-1106.

  • Type X, exterior: systems that may be directly exposed to all weather conditions.
  • Type Y, interior and semi-exposed: areas not directly exposed to rain but subject to limited UV and low temperatures.
  • Type Z1, high-humidity interior: interior environments where relative humidity can be 85% or higher.
  • Type Z2, controlled interior: interior environments where relative humidity is below 85%.

This classification is an important criterion for determining which environmental conditions an intumescent coating is suitable for.

ISO 12944 and EAD classes do not mean the same thing

There is an important distinction here that is often overlooked.

ISO 12944 mainly deals with the environmental conditions and protective paint systems relevant to corrosion protection of steel structures.

EAD 350402-00-1106 assesses whether reactive fire protective coatings can maintain their fire performance after specific environmental exposures.

The two classification systems should therefore not be treated as direct equivalents.

On a project, the corrosion conditions and the durability requirements of the fire protection system must each be assessed separately.

What determines the service life of the system?

The service life of a correctly specified fire protection system does not depend on the chosen intumescent coating alone.

Surface preparation, primer selection, dry film thickness, application conditions, topcoat selection, environmental exposure and periodic inspections all directly affect system performance.

For exterior applications in particular, the coating system should be inspected regularly, and areas showing impact damage, cracking, blistering, corrosion or loss of coating should be repaired appropriately.

How should the right intumescent coating be selected?

When specifying an intumescent coating for a steel structure, asking how many minutes of fire resistance the product provides is not enough.

Fire resistance period, steel section factor, critical steel temperature, application environment, service environment, humidity and UV exposure, corrosivity category, primer compatibility and topcoat requirement must all be assessed together.

In short:

The right fire protection system is one that works not only during a fire, but also keeps its performance through all the years before one.

At Firesol, we assess the service conditions of steel structures together with the project-specific fire resistance requirements, and provide technical solutions for specifying suitable passive fire protection systems.